Showing posts with label Orifice Plate. Show all posts
Showing posts with label Orifice Plate. Show all posts

An Introduction to Industrial Flowmeters

Electromagnetic flowmeter
Electromagnetic flowmeter
(courtesy of Azbil)
Flowmeters measure the rate or quantity of moving fluids, in most cases liquid or gas, in an open channel or closed conduit. There are two basic flow measuring systems: those which produce volumetric flow measurements and those delivering a weight or mass based measurement. These two systems, required in many industries such as power, chemical, and water, can be integrated into existing or new installations. For successful integration, the flow measurement systems can be installed in one of several methods, depending upon the technology employed by the instrument. For inline installation, fittings that create upstream and downstream connections that allow for flowmeter installation as an integral part of the piping system. Another configuration, direct insertion, will have a probe or assembly that extends into the piping cross section. There are also non-contact instruments that clamp on the exterior surface of the piping and gather measurements through the pipe wall without any contact with the flowing media.

Because they are needed for a variety of uses and industries,
Orifice plate
Orifice plate
(Flow-Lin)
there are multiple types of flowmeters classified generally into four main groups: mechanical, inferential, electrical, and other.

Quantity meters, more commonly known as positive displacement meters, mass flowmeters, and fixed restriction variable head type flowmeters all fall beneath the mechanical category. Fixed restriction variable head type flowmeters use different sensors and tubes, such as orifice plates, flow nozzles, and venturi and pitot tubes.

Inferential flowmeters include turbine and target flowmeters, as well as variable area flowmeters also known as rotameters.

Thermal Mass Flowmeter
Thermal Mass Flowmeter
(Kurz)
Laser doppler anemometers, ultrasonic flowmeters, thermal mass, and electromagnetic flowmeters are all electrical-type flowmeters.

The many application classes throughout the processing industries have led to the development of a wide range of flow measurement technologies and products. Each has its own advantages under certain operating conditions. Sorting through the choices and selecting the best technology for an application can be accomplished by consulting with a process instrumentation specialist. The combination of your own process knowledge and experience with their product application expertise will develop an effective solution.

For more information regarding any type or style of flowmeter, visit http://www.psi-team.com or call 800-223-1468.