Anderson Greenwood Instrument Valve Solutions

Anderson Greenwood Instrument Valves
TESCOM Anderson Greenwood Instrumentation serves many industries and applications. The product line includes a comprehensive range of isolation valves (including root and gauge models), instrument manifolds (for pressure, level and flow measurement), and purpose-designed Instrument Enclosure Systems.

Products include:
  • Hand Valves
  • Gauge Valves
  • Primary Isolation Gauge Root Valves
  • Pressure Manifolds
  • Flow and Level Manifolds
  • IntelliMount™ Systems
  • Saddlemount 
  • Keyblok Manifolds 
  • Monoflange
  • Instrument Protection Systems
  • Modular Mounting Systems
  • ACCU-Mount™ Systems

For more information, contact Piping Specialties, Inc / PSI Controls. Call them at 800-223-1468  of visit their website at https://psi-team.com.

Refractometer Application in Kraft (Sulphate) Pulp Process: Digester Washing Zone and Blowline

Refractometer Black Liquor

Introduction

The first operation in the Kraft pulping process involves the extraction of cellulose from wood by dissolving the lignin that binds the fibers together. This is done in a strongly alkaline solution.

This process is known as cooking. After the wood pulp is obtained, it is washed and bleached to obtain the fibrous product.

To optimize the pulp chemical consumption and water usage, the black liquor concentrations have to be measured before and after washing.

Application

Incoming wood is debarked and chipped to an optimal size to minimize fibre damage, and to maximize the impregnation with the cooking liquor. The chips and the cooking liquor are fed into a large vessel known as digester. The pulping reaction takes place under pressure and at a high temperature.

After cooking, the pulp passes through a blow line to the blow tank and then to a washing section. The diffuser washers separate the black liquor from the fibers by washing them with a washing liquor or water. The products from the fiber line are a clean pulp, and a diluted black liquor known as weak liquor.

The washed pulp is then screened before it is sent to the bleaching plant, and the weak black liquor passes from the washing section to the chemical recovery process.

Instrumentation and installation

The K-Patents SAFE-DRIVE Refractometer PR-23-SD measures in real-time the Total Dissolved Solids (TDS) content in black liquor.

K-Patents PR-23-SD
The K-Patents refractometer is installed in-line in different points after the digester. TDS measurement
in the blow pulp suspension after the digester enables monitoring of the diffuser operation. Together with other measurements (e.g. filtrate and flush liquor) this provides the mill with the ability to control the performance of the washing zone in the digester. In addition, TDS measurement in the blow line allows the performance of the digester to be monitored, ensuring that it yields the correct concentration. The combination of these measurements facilitates continuous calculation of the mass balances of the digester.

The refractometer’s measurement is unaffected by bubbles, particles, consistency, flow, ion changes, pH, temperature, pressure, color or turbulent flow. The measurement surface is periodically cleaned using an integrated and automatic prism cleaning system.

The K-Patents PR-23-SD 

Black liquor concentration measurement with the SAFE-DRIVE process refractometer helps to increase washing efficiency, obtain a consistent pulp quality, reduce bleaching chemical consumption and environmental load, and increase evaporation efficiency.


For more information, contact PSI Controls (Piping Specialties, Inc.). Call them at 800-223-1468 or visit their website at https://psi-team.com.

An Innovative and Unique Solution for Measuring Dry Gas Flow in Wet Gas Environments

Kurz Wet Flow

The Problem - Reading Dry Gas Flow in a Wet Gas Environment


Irrespective of any single manufacturer's claim, daily and seasonal temperature changes in wet gas environments cause erratic high flow readings in standard thermal flow meters. With standard thermal flow meters, as the flow flow temperature decreases, more water condenses out of the gas causing the standard thermal flow meter to misread the water contacting the sensor as dense air. Within an active condensing gas flow, the low overheat (less than 50°C) of standard flow meter products make them incapable of accurately reading the dry gas flow within a wet gas environment.

Kurz Instruments Develops a Practical Implementation of the Leidenfrost Effect to Overcome the Problem


Leidenfrost Effect
The Leidenfrost Effect, named after 18th Century scientist Johann Gottlob Leidenfrost, is a phenomena that happens when liquid contacts a surface significantly hotter than the liquid’s boiling point.  A vapor layer is created between the liquid and the surface that keeps the liquid suspended, delaying the rate of evaporation. 

Kurz Instrument developed an innovative solution. By maintaining a high signal-to-noise ratio and a high sensor overheat, mist particles vaporize on impact with the heated sensor. Thus, by employing the Leidenfrost Effect, the leading edge of larger droplets vaporize to steam, which diverts the remaining water around and away from the heated sensor. The unique design of the WGF allows it to accurately monitor the dry gas component in a wet gas flow regardless of changing condensation levels.

The Kurz WGF flow meter for condensing gas environments includes features that allow them to outperform all other currently available thermal mass flow meters. Kurz was the first thermal mass flow meter manufacturer offering accurate and reliable condensing gas flow measurements. Their unique design centers around a high 300°C sensor overheat capability. The design also provides sensor overheat protection at zero flow through the incorporation of a unique temperature control and power limiting design. As a result, the Kurz WGF is not affected by water droplets in the flow stream. This unique technology establishes Kurz flow meters with WGF technology as the only thermal flow devices suitable for biogas and condensing gas environments found in digesters, landfills, animal feeding operations, mining, and wet stacks.

To learn more about The Leidenfrost Effect and how it applies to Kurz flow meters, visit this page.


To learn more abount Kurz Instrument products, call PSI Controls (Piping Specialties, Inc.) at 800-223-1468, or visit their web site here - https://psi-team.com.

Flow Safe Safety Relief Valves



Flow Safe is a USA based manufacturer of high quality and high performance safety relief valve products, including pilot operated safety relief valves and spring operated safety relief valves.  Their products are used worldwide in these markets:  Natural gas production, transmission, underground storage, and distribution; Petroleum and petrochemicals; Mechanical equipment manufacturers including reciprocating, centrifugal compressors and positive displacement blowers; Industrial gas industries including cryogenics and lite molecular weight gases; High pressure methanol injection; Liquid pipeline surge relief protection; Chemical Industry; Power; Pulp and paper; Food and beverage; Marine; and Aerospace.

For more information about Flow Safe Safety Relief Valves in New England, contact Piping Specialties, Inc. Call them at 800-223-1468 or visit their website at https://psi-team.com.

Process Refractometers Improve Production and Quality of Phosphoric Acid Production

Phosphoric Acid Production
Phosphoric acid is an important product used in industrial applications such as the manufacture of agricultural phosphate fertilizers, detergents, pesticides, metal coating, etc. Due to its non-toxic and mildly acidic nature, phosphoric acid is also used in other applications including food flavoring, soft drinks, pharmaceuticals, dental products, cosmetics, and skin care products.

Phosphoric acid is produced by mining the naturally occurring phosphate rock and processing it via a wet process or a thermal process. The concentration of the acids during the wet process can be measured inline with the process refractometers, such as those manufactured by K-Patents.

To learn more about where and how these refractometers are used in wet process phosphoric acid production, visit the PSI Controls web page. 


Piping Specialties, Inc. / PSI Controls
800-223-1468

Wiring the AMETEK Drexelbrook Universal IV RF Admittance/Capacitance Continuous Level Measurement System


The video above describes how to wire the Drexelbrook Universal IV  Continuous Level Measurement System.

The Universal IV level system is the most advanced RF continuous level measurement system available. It includes worldwide hazardous location approval and is immune to vapor, dust and foam interference as well as to tank obstructions such as nozzles, ladders, pipes and agitators. The Universal IV features standard display/keypad, auto-ranging capabilities, local or remote installation, as well as state of the art measurement technology providing unmatched stability and accuracy. It is ideal for a wide array of level applications in industries such as oil and gas refining, water and wastewater along with the pharmaceutical and biotech industries.

Drexelbrook Universal IV
The Pro Model
integrates the RF Admittance technology with the versatility of Cote-Shield technology.  The Cote-Shield technology is designed to ignore coatings on the probe and measurement span of 1" to 800'. 

The Lite Model is the entry level RF Capacitance measurement system without Cote-Shield capabilities, can be used in non-coating conductive liquids and insulated coating applications where Cote-Shield is not required and offers a level measurement range up to 20' typically.

Universal IV RF Continuous Level Measurement System Features
  • Easy one-time calibration
  • Low cost of ownership, no maintenance and no moving parts to wear out
  • Immune to tank obstructions such as nozzles, ladders, pipes and agitators
  • Available as intrinsically safe systems
  • Output: 4-20 mAdc, HART. Compatible with HART.
  • Supply voltage: 13-30 VDC, 2 wire loop powered